When it come to a prewash this is the product you require. It has been formulated from the latest surfactant technology to be extremely aggressive on dirt but kind to paintwork. When it comes to trying to soften or remove heavy winter road grime, frontline is extremely effective. We even went as far as to add a fantastic Cherry fragrance to help the first stage of your wash program at least smell a little better!

Depending on the degree of soiling, Frontline can be diluted up to 100:1. Simply apply to the dirty paint work with a spray bottle or foam lance. Allow to dwell for 2-5 minutes then power wash off. This will leave the paintwork ready for the next detailing stage.

• Low dilution activation rates
• High foaming
• Great Cherry smell
• Paint safe
• Economical to use
• Solvent free

Usage Guidelines

For best results use Frontline Pre-Wash through a high pressure foaming lance. Ideally one that has an independent product resevoir connected directly to the lance. Add approximately 10% to the resevior bottle and dilute with clean water. Adjust the lance settings to give the maximum foam density. Apply this to the vehice and wheels in a liberal coating and allow to dwell for 3-5 minutes. Remove with a high pressure lance before moving to the next detailing step. Never apply and allow to dwell on vehicle in direct sunlight.

Recommended Dilution Rates

– Heavy duty degreasing – 10:1 with clean fresh water

– Pre-Wash

Heavy Soiling               20:1 with clean fresh water

Light Soiling                 40:1 with clean fresh water

De-Dusting                   100:1 with clean fresh water

Kit Contains:

Frontline Pre wash Cleanser – 5L

Chemical Resistant Spray Bottle with Chemical Resistant Spray Head

The post Frontline Pre-wash Cleanser 5L with Spray Bottle appeared first on 50cal Detailing.

Target is the ultimate in tar and glue removal. We have formulated Target tar and glue remover in such a way that it rapidly accelerates the penetration time into tar and glue deposits. You will see the tar literally dissolve in the solution and turn it brown. This will not affect top coats, paints or polishes when used as directed. It is completely free from harsh industrial hydrocarbons and chlorinated solvents and due to the adapted surfactant chemistry results in a super quick removal time.

Target is an easy to use and fast acting tar remover.  50cal Target should ideally be sprayed thinly or applied to a microfiber cloth and held onto the affected area for 10-20 seconds. Then the tar should simply wipe away easily. After which, if there are any deposits left, repeat the process. Wipe the treated surface with a clean microfiber cloth and to complete the finish, and you can also use 50cal Detailing Stealth Last Touch Detailer as an aid to complete surface finishing.

• Market leading speed of tar and glue removal.
• Safe for nearly all surface finishes.
• Mild odour.
• Extremely efficient and easy to use.
• Target contains no harsh solvents

Usage Guidelines

Ensure paintwork is dry and thoroughly cleaned. Spray Target onto the affected panel / area and allow to activate for 1-2 minutes. Wipe off with a clean microfiber cloth then rinse thoroughly with fresh water or diluted neutral shampoo. Never apply and allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

Kit Contains:

Target Tar & Glue Remover – 500ml or 5L (your choice)

Chemical Resistant Spray Bottle with Chemical Resistant Spray Head

The post Target Tar & Glue Remover with Spray Bottle appeared first on 50cal Detailing.

Retaliate alloy wheel cleaner is a heavy duty concentrated wheel cleaner. It is completely acid free and is safe for use on all alloy wheels. This is a professional product and is highly concentrated, so it’s not to be used neat.

Retaliate uses the latest technology to break down road grime, dirt and brake dust easily without the need to be acidic.  The products was designed to make cleaning your wheels as effortless as possible. We have dilution guidelines but ‘our’ definition of dirty may differ somewhat from yours, so please dilute to suit! Simply spray the diluted product onto the wheel, allow a dwell time of circa 30 seconds to one minute, then agitate with your preferred choice of brush, power wash off and admire the showroom finish result. All of the components are fully biodegradable.

• Fully concentrated
• Extremely economical dilution ratios
• Non Acid
• Safe across all alloy wheel finishes
• Provides a near showroom finish.
• Will not degrade tyre rubbers.

Usage Guidelines

Depending on the degree of contamination Retaliate can be used at varying dilutions. For heavily soiled wheels remove surface soiling with a high pressure lance and apply Retaliate in a liberal coating through at a dilution of 1:1 and allow to dwell for 3-5 minutes. If required, agitate with an appropriate brush or mitt. Remove with a high pressure lance before moving to the next detailing step. For lighter soiled wheels, apply at a dilution of circa 5:1, then remove as before. Never apply and allow to dwell on wheels in direct sunlight. Always check the suitability of the product for your wheels by doing a quick test.

Kit Contains:

Retaliate Concentrated Wheel Cleaner 500ml or 5L (choose above)

Chemical Resistant Spray Bottle with Chemical Resistant Spray Head

The post Retaliate Wheel Cleaner with Spray Bottle appeared first on 50cal Detailing.