Ambush superfoam is a high strength snow foam which is a long cling foam, is unsurpassed by its dwell time and cleaning ability. Ideally Ambush superfoam is used in a dedicated snow foam lance at high pressure. When mixed correctly it will produce a thick mousse like foam which adheres to vertical surfaces for up to 30 minutes. This is as close to a ‘touch less’ wash as you will get and it will not degrade any prior surface treatments.

Ambush snow foam also has a built in wax and dewatering aid to further help the rinsing of the product from the vehicle. It works extremely efficiently on the removal of break dust and road film on wheels thus potentially rendering the need to use a secondary alloy wheel cleaner unnecessary. We recommend using a starting dilution of 1.5 to 2 inches into a 1lt wash bottle, topped up with ideally deionised water that’s attached to the foaming lance. The air intake and pressure should be set to the maximum settings available. The product is also enhanced with a rich Bubblegum smell.

• Unsurpassed cleaning performance
• Market beating foaming characteristics
• Unrivalled product dwell time on vehicle
• Excellent alloy wheel cleaning performance
• Wax and dewatering additives
• LSP (Last Step Product) safe
• Extremely economical dilution rates
• Rich Bubblegum smell
• Developed in conjunction with the highest professional requirements
• Not for amateurs!

Usage Guidelines

For best results use Ambush SuperFoam through a high pressure foaming lance. Add approximately 10-20% to the reservoir bottle and dilute with clean water. Adjust the lance settings to give the desired moose foam. Apply this to the vehicle and wheels in a liberal coating and allow to dwell for anything up to 30 minutes. Rinse off with a high pressure lance for a near ‘touchless’ finish. Never apply and allow to sit on vehicle in direct sunlight.

Pack Contains:

Ambush Superfoam

Foaming Spray head on 700ml spray bottle.

The post Ambush Superfoam With Foaming Hand Sprayer appeared first on 50cal Detailing.

Combat is a PH neutral safe pre wash product.  So mild you could shower with it yourself, however when used correctly the hands on cleaning power of this product will leave your vehicle looking as good as when it left the showroom.  Developed with the latest technology, we have been able to achieve an extremely mild yet powerful product.  Not only does it smell fantastic but it also helps to soften dirt during your pre wash stages, making it easier for you to clean your car with having to apply any pressure to remove dirt and grime.

We recommend using Combat snow foam in a snow foam lance.  Simply add approximately 100ml of Combat into a 1L snow foam bottle and fill the rest with 900ml of fresh clean water.  This should result in a medium density foam and would be approximately a 100:1 dilution rate.  If you live in a hard water area or would like to have thicker foam, simply add some more combat to the mixture.

• Exceptional cleaning performance for a pH neutral product
• Totally wax safe (LSP safe)
• Very mild on dilution
• Wax and dewatering additives
• Extremely economical dilution rates
• Juicy Orange scent
• Developed in conjunction with the highest professional requirements
• High lubricity to aid with washing

Usage Guidelines

Depending on the degree of contamination Combat can be used at varying dilutions. For heavy soiling, the recommended dilution with clean water is 5:1 and for moderate soiling, 10:1. For general cleaning and light soiling a dilution of 20:1 should suffice. The easiest way to use Combat is through a snow foam lance but it can also be added to a sprayer or simply to a bucket like a shampoo and applied with a lambs wool mitt.  Remove / rinse any remaining residue with clean water. Never allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

Pack Contains:

Combat Neutral Snow Foam – 500ml or 5L (your choice)

Foaming Spray head on 700ml spray bottle.

The post Combat Neutral Snow Foam With Foaming Hand Sprayer appeared first on 50cal Detailing.