How to use Stealth V2 Detailer

Thoroughly wash the vehicle to ensure your paintwork is as clean as possible. Spray Stealth V2 on one panel at a time and using a soft clean microfibre cloth, simply spread evenly and buff to a high gloss finish.

The post Stealth V2 Quick Detailing Spray appeared first on 50cal Detailing.

Cover-Up will mask light swirls marks, spider webs, and holograms in your paintwork.

Even though cover up is a bright blue colour, it can be used on any colour car and for best results apply with a dual action polisher.

For longevity this products can be sealed in with a Wax or Sealant, we personally recommend our Pentawax for a long lasting high gloss finish.

Usage Guidelines

Cover-Up Filler Glaze can be applied by hand or dual action machine. By hand it should be applied using a clean foam applicator pad. Apply 2-3 pea-sized drops to the applicator pad and massage evenly into the panel in a thin layer, allow to cure and haze for approximately 3-5 minutes. Remove the excess product by gently buffing with a clean microfibre buffing cloth. To achieve the best results we recommend application with a dual action polisher, using a foam finishing pad. Apply 2-3 pea-sized drops onto the finishing pad. Then work in thoroughly to the panel at a slow speed until only a thin film remains. The film should then be buffed off carefully using a clean microfibre buffing cloth.

The post Cover Up Filler Glaze appeared first on 50cal Detailing.