We recommend using Combat snow foam in a snow foam lance.  Simply add approximately 100ml of Combat into a 1L snow foam bottle and fill the rest with 900ml of fresh clean water.  This should result in a medium density foam and would be approximately a 100:1 dilution rate.  If you live in a hard water area or would like to have thicker foam, simply add some more combat to the mixture.

• Exceptional cleaning performance for a pH neutral product
• Totally wax safe (LSP safe)
• Very mild on dilution
• Wax and dewatering additives
• Extremely economical dilution rates
• Juicy Orange scent
• Developed in conjunction with the highest professional requirements
• High lubricity to aid with washing

Usage Guidelines

Depending on the degree of contamination Combat can be used at varying dilutions. For heavy soiling, the recommended dilution with clean water is 5:1 and for moderate soiling, 10:1. For general cleaning and light soiling a dilution of 20:1 should suffice. The easiest way to use Combat is through a snow foam lance but it can also be added to a pump sprayer or simply to a bucket like a shampoo and applied with a lambs wool mitt.  Remove / rinse any remaining residue with clean water. Never allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

The post Combat Neutral Snow Foam appeared first on 50cal Detailing.

Depending on the degree of soiling, Frontline can be diluted up to 100:1. Simply apply to the dirty paint work with a spray bottle or foam lance. Allow to dwell for 2-5 minutes then power wash off. This will leave the paintwork ready for the next detailing stage.

• Low dilution activation rates
• High foaming
• Great Cherry smell
• Paint safe
• Economical to use
• Solvent free

Usage Guidelines

For best results use Frontline Pre-Wash through a high pressure foaming lance. Ideally one that has an independent product reservoir connected directly to the lance. Add approximately 10% to the reservoir bottle and dilute with clean water. Adjust the lance settings to give the maximum foam density. Apply this to the vehicle and wheels in a liberal coating and allow to dwell for 3-5 minutes. Remove with a high pressure lance before moving to the next detailing step. Never apply and allow to dwell on vehicle in direct sunlight.

Recommended Dilution Rates
– Heavy duty degreasing – 10:1 with clean fresh water

– Pre-Wash
Heavy Soiling               20:1 with clean fresh water
Light Soiling                 40:1 with clean fresh water
De-Dusting                   100:1 with clean fresh water

The post Frontline Pre-Wash Cleanser appeared first on 50cal Detailing.