Its effective agitation ensures thorough cleaning, reaching even the most difficult-to-access areas and maximising the cleaning power of your wheel cleaning products.

It gently glides over all wheel finishes including painted, polished, and powder-coated surfaces, and effectively lifts away dirt and grime without the risk of scratches and swirl marks.

The specially designed split microfibre pile boasts a large surface area, allowing it to effectively agitate wheel cleaners for maximum contact and cleaning power. It lifts and locks away harmful grit and grime deep within the material, preventing re-contamination.

• Safe for all wheel finishes
• Lifts and traps embedded dirt
• Enhanced grip and control.
• Maximizes product effectiveness.

This pack contains 2 x mitts.

The post Microfibre Wheel Cleaning Mitt Double Pack appeared first on 50cal Detailing.

Its effective agitation ensures thorough cleaning, reaching even the most difficult-to-access areas and maximising the cleaning power of your wheel cleaning products.

It gently glides over all wheel finishes including painted, polished, and powder-coated surfaces, and effectively lifts away dirt and grime without the risk of scratches and swirl marks.

The specially designed split microfibre pile boasts a large surface area, allowing it to effectively agitate wheel cleaners for maximum contact and cleaning power. It lifts and locks away harmful grit and grime deep within the material, preventing re-contamination.

• Safe for all wheel finishes
• Lifts and traps embedded dirt
• Enhanced grip and control.
• Maximizes product effectiveness.

The post Microfibre Wheel Cleaning Mitt appeared first on 50cal Detailing.

This is the ultimate solution for cleaning all of your wheels, especially those hard-to-reach places.

The 50cal Microfibre Wheel Cleaning brush is made from tough but soft microfibre material.  It’s chemical resistant and durable.  It’s the perfect partner to your detailing and wheel cleaning regime.

The post Microfibre Wheel Cleaning Brush appeared first on 50cal Detailing.

They come in 3 different sizes to suit a huge range of uses. You’ll find that having a set of these will come in useful for all sorts of tasks, from cleaning wheels on your car, to removing dirt from all sorts of nooks and crannies around your engine bay and much more.

The brushes provide amazing coverage due to the their thick bundles of soft bristles. These soft bristles will not scratch or dull the surface of your wheel and best of all they are chemical resistant meaning you can use the EZ Detail Brush with any type of wheel cleaner.

The brushes also have flexible stems which conform to whatever you’re cleaning. And it has a vinyl covered tip to help prevent accidental scratches and scrapes. Above the ergonomic handle the EZ Detail Brushes have a rubber hand guard to protect your knuckles.

Let these brushes find a way into your detailing kit and you’ll wonder how you ever managed without them.

Size: 16 x 4 Inches

The post EZ Detail Brushes Go EZ Wheel Cleaning Brush appeared first on 50cal Detailing.

They come in 3 different sizes to suit a huge range of uses. You’ll find that having a set of these will come in useful for all sorts of tasks, from cleaning wheels on your car, to removing dirt from all sorts of nooks and crannies around your engine bay and much more.

The brushes provide amazing coverage due to the their thick bundles of soft bristles. These soft bristles will not scratch or dull the surface of your wheel and best of all they are chemical resistant meaning you can use the EZ Detail Brush with any type of wheel cleaner.

The brushes also have flexible stems which conform to whatever you’re cleaning. And it has a vinyl covered tip to help prevent accidental scratches and scrapes. Above the ergonomic handle the EZ Detail Brushes have a rubber hand guard to protect your knuckles.

Let these brushes find a way into your detailing kit and you’ll wonder how you ever managed without them.

Size: 19 x 4.5 Inches

The post EZ Detail Brushes Big EZ Wheel Cleaning Brush appeared first on 50cal Detailing.

They come in 3 different sizes to suit a huge range of uses. You’ll find that having a set of these will come in useful for all sorts of tasks, from cleaning wheels on your car, to removing dirt from all sorts of nooks and crannies around your engine bay and much more.

The brushes provide amazing coverage due to the their thick bundles of soft bristles. These soft bristles will not scratch or dull the surface of your wheel and best of all they are chemical resistant meaning you can use the EZ Detail Brush with any type of wheel cleaner.

The brushes also have flexible stems which conform to whatever you’re cleaning. And it has a vinyl covered tip to help prevent accidental scratches and scrapes. Above the ergonomic handle the EZ Detail Brushes have a rubber hand guard to protect your knuckles.

Let these brushes find a way into your detailing kit and you’ll wonder how you ever managed without them.

Size: 13 x 2.5 Inches

The post EZ Detail Brushes Mini EZ Wheel Cleaning Brush appeared first on 50cal Detailing.

How to use the Clay Bar

Prepare your vehicle by thoroughly cleaning the surfaces including an iron removal and tar removal.

Separate the clay bar into 3 or 4 manageable pieces.  Before use of a piece, it can be warmed in your hands to make it easier to use.

Wet the surface you intend to clay bar with a clay lubricant of your choice.  Stealth last touch detailer can be used.

Apply a piece of the claybar to the lubricated surface and move the clay bar in a back and forth motion. Regularly check the clay bar condition and cleanliness.  When the claybar becomes contaminated fold it in half once to enclose the contaminated surface in the centre of the clay and to reveal a new clean surface to work with. Continue this process until all surfaces are smooth to the touch or no contamination is visible on the clay bar.

After use if the piece of claybar is not totally contaminated it can be returned to the plastic case for storage for future use. Moderately contaminated clay can be reused on areas such as wheels or even on glass. Badly contaminated clay should be discarded.

The post Claymore Detailing Clay Bar – Purple Heavy Grade appeared first on 50cal Detailing.

Retaliate alloy wheel cleaner is a heavy duty concentrated wheel cleaner. It is completely acid free and is safe for use on all alloy wheels. This is a professional product and is highly concentrated, so it’s not to be used neat.

Retaliate uses the latest technology to break down road grime, dirt and brake dust easily without the need to be acidic.  The products was designed to make cleaning your wheels as effortless as possible. We have dilution guidelines but ‘our’ definition of dirty may differ somewhat from yours, so please dilute to suit! Simply spray the diluted product onto the wheel, allow a dwell time of circa 30 seconds to one minute, then agitate with your preferred choice of brush, power wash off and admire the showroom finish result. All of the components are fully biodegradable.

• Fully concentrated
• Extremely economical dilution ratios
• Non Acid
• Safe across all alloy wheel finishes
• Provides a near showroom finish.
• Will not degrade tyre rubbers.

Usage Guidelines

Depending on the degree of contamination Retaliate can be used at varying dilutions. For heavily soiled wheels remove surface soiling with a high pressure lance and apply Retaliate in a liberal coating through at a dilution of 1:1 and allow to dwell for 3-5 minutes. If required, agitate with an appropriate brush or mitt. Remove with a high pressure lance before moving to the next detailing step. For lighter soiled wheels, apply at a dilution of circa 5:1, then remove as before. Never apply and allow to dwell on wheels in direct sunlight. Always check the suitability of the product for your wheels by doing a quick test.

Kit Contains:

Retaliate Concentrated Wheel Cleaner 500ml or 5L (choose above)

Chemical Resistant Spray Bottle with Chemical Resistant Spray Head

The post Retaliate Wheel Cleaner with Spray Bottle appeared first on 50cal Detailing.

Cammo tyre dressing has been developed to give a multi-function option to the professional detailer or valeter. Cammo is easy to apply and spreads effortlessly. A single application seals and waterproofs the tyre wall leaving a matt to satin finish depending on the tyre. If you want your tyres to look slick, and have the wet look, a second application brings out the gloss.

When cammo is applied correctly you will never have an issue with ‘sling’ or drips onto your wheels or body panels. It lasts as well! A double application can still hold its appearance for up to 2-3 weeks, albeit depending on ambient conditions. The silicones will nourish the rubber and as the carrier flashes off so quickly, it won’t degrade the rubber unlike many products currently in the marketplace.

• Very economical due to its fast flash
• Kind to tyres
• Lasts for weeks
• Water repellent
• Zero sling
• Both Matt and Wet Look finishes achievable with a single product

Usage Guidelines

Apply neat to the tyre by using a sponge or microfibre applicator pad. Allow to dry and reapply if a deeper gloss is required. Always check the suitability of the product for your vehicle first, by doing a quick test.

The 50cal Detailing Tyre Dressing Applicator Pad makes applying cammo to your tyres an easy process.

This sponge applicator is the perfect accessory for applying tyre and trim gels and liquids. The firm green part makes the applicator easy to hold and the soft grey part easily forms around any surface and spreads the dressing eveningly to the tyres walls round mouldings and letterings. The sharp edges make it easy to apply the dressing accurately in tight areas.

Size: 95mm x 35mm

HOW TO USE THE TYRE DRESSING APPLICATOR:

1. Ensure that the surface is well cleaned and free from existing dressings.

2. Apply Cammo to the applicator and spread across the surface.

3. If needed apply another layer to enhance the appearance.

Kit Contains:

Cammo Tyre Dressing 500ml

Tyre Dressing Applicator Sponge

The post 50cal Detailing Tyre Care Kit appeared first on 50cal Detailing.

Retaliate alloy wheel cleaner is a heavy duty concentrated wheel cleaner. It is completely acid free and is safe for use on all alloy wheels. This is a professional product and is highly concentrated, so it’s not to be used neat.

Retaliate uses the latest technology to break down road grime, dirt and brake dust easily without the need to be acidic.  The products was designed to make cleaning your wheels as effortless as possible. We have dilution guidelines but ‘our’ definition of dirty may differ somewhat from yours, so please dilute to suit! Simply spray the diluted product onto the wheel, allow a dwell time of circa 30 seconds to one minute, then agitate with your preferred choice of brush, power wash off and admire the showroom finish result. All of the components are fully biodegradable.

• Fully concentrated
• Extremely economical dilution ratios
• Non Acid
• Safe across all alloy wheel finishes
• Provides a near showroom finish.
• Will not degrade tyre rubbers.

Usage Guidelines

Depending on the degree of contamination Retaliate can be used at varying dilutions. For heavily soiled wheels remove surface soiling with a high pressure lance and apply Retaliate in a liberal coating through at a dilution of 1:1 and allow to dwell for 3-5 minutes. If required, agitate with an appropriate brush or mitt. Remove with a high pressure lance before moving to the next detailing step. For lighter soiled wheels, apply at a dilution of circa 5:1, then remove as before. Never apply and allow to dwell on wheels in direct sunlight. Always check the suitability of the product for your wheels by doing a quick test.

Decon Fallout Remover is our 50cal detailing weapon against iron fallout and stubborn brake dust.  We have developed decon to attack iron and get to work as soon as it’s sprayed on.  We have taken the chemistry to the edge with this product combining the latest surfactant technology with our existing fallout removal chemistry, but giving a stable, neutral product that will challenge, compete and leave the competition in its wake.

Simply apply decon by spraying onto the painted surface, wait for the reaction then rinse. The product is completely safe on paint work as well as alloy wheels. We offer this product in a ready to use format for ease of use and application. Use on cool surfaces, not in direct sunlight, with a short dwell time 1-2 minutes, drench rinsing and make sure you do not leave to dry.

• Instant results
• Self-wetting technology
• PH neutral
• Ready to use
• Great Cherry scent
• Paint work safe

Usage Guidelines

Depending on the degree of contamination Decon can be used at varying dilutions. For suspected heavy soiling, the recommended dilution with clean water is 1:1, however neat application may be required for heavily contaminated wheels. For body work a dilution with clean water of 1:1 should suffice. Remove any remaining residue with clean water. Never apply and allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

Cammo tyre dressing has been developed to give a multi-function option to the professional detailer or valeter. Cammo is easy to apply and spreads effortlessly. A single application seals and waterproofs the tyre wall leaving a matt to satin finish depending on the tyre. If you want your tyres to look slick, and have the wet look, a second application brings out the gloss.

When cammo is applied correctly you will never have an issue with ‘sling’ or drips onto your wheels or body panels. It lasts as well! A double application can still hold its appearance for up to 2-3 weeks, albeit depending on ambient conditions. The silicones will nourish the rubber and as the carrier flashes off so quickly, it won’t degrade the rubber unlike many products currently in the marketplace.

• Very economical due to its fast flash
• Kind to tyres
• Lasts for weeks
• Water repellent
• Zero sling
• Both Matt and Wet Look finishes achievable with a single product

Usage Guidelines

Apply neat to the tyre by using a sponge or microfibre applicator pad. Allow to dry and reapply if a deeper gloss is required. Always check the suitability of the product for your vehicle first, by doing a quick test.

The 50cal Detailing Tyre Dressing Applicator Pad makes applying cammo to your tyres an easy process.

This sponge applicator is the perfect accessory for applying tyre and trim gels and liquids. The firm green part makes the applicator easy to hold and the soft grey part easily forms around any surface and spreads the dressing eveningly to the tyres walls round mouldings and letterings. The sharp edges make it easy to apply the dressing accurately in tight areas.

Size: 95mm x 35mm

HOW TO USE THE TYRE DRESSING APPLICATOR:

1. Ensure that the surface is well cleaned and free from existing dressings.

2. Apply Cammo to the applicator and spread across the surface.

3. If needed apply another layer to enhance the appearance.

Kit Contains:

Retaliate Concentrated Wheel Cleaner 500ml

Decon Fallout Remover 500ml

Cammo Tyre Dressing 500ml

Tyre Dressing Applicator Sponge

The post 50cal Detailing Wheel Care Kit appeared first on 50cal Detailing.