A double pack of our powerful heavy duty cleaning Ambush Superfoam with the 700ml Foaming Spray Bottle.
Ambush superfoam is a high strength snow foam which is a long cling foam, is unsurpassed by its dwell time and cleaning ability. Ideally Ambush superfoam is used in a dedicated snow foam lance at high pressure. When mixed correctly it will produce a thick mousse like foam which adheres to vertical surfaces for up to 30 minutes. This is as close to a ‘touch less’ wash as you will get and it will not degrade any prior surface treatments.
Ambush snow foam also has a built in wax and dewatering aid to further help the rinsing of the product from the vehicle. It works extremely efficiently on the removal of break dust and road film on wheels thus potentially rendering the need to use a secondary alloy wheel cleaner unnecessary. We recommend using a starting dilution of 1.5 to 2 inches into a 1lt wash bottle, topped up with ideally deionised water that’s attached to the foaming lance. The air intake and pressure should be set to the maximum settings available. The product is also enhanced with a rich Bubblegum smell.
- Unsurpassed cleaning performance
- Market beating foaming characteristics
- Unrivalled product dwell time on vehicle
- Excellent alloy wheel cleaning performance
- Wax and dewatering additives
- LSP (Last Step Product) safe
- Extremely economical dilution rates
- Rich Bubblegum smell
- Developed in conjunction with the highest professional requirements
- Not for amateurs!
For best results use Ambush SuperFoam through a high pressure foaming lance. Add approximately 10-20% to the reservoir bottle and dilute with clean water. Adjust the lance settings to give the desired moose foam. Apply this to the vehicle and wheels in a liberal coating and allow to dwell for anything up to 30 minutes. Rinse off with a high pressure lance for a near ‘touchless’ finish. Never apply and allow to sit on vehicle in direct sunlight.
Ambush Superfoam – 500ml or 5L (your choice)
Foaming Spray head on 700ml spray bottle.