Cover-Up will mask light swirls marks, spider webs, and holograms in your paintwork.

Even though cover up is a bright blue colour, it can be used on any colour car and for best results apply with a dual action polisher.

For longevity this products can be sealed in with a Wax or Sealant, we personally recommend our Pentawax for a long lasting high gloss finish.

Usage Guidelines

Cover-Up Filler Glaze can be applied by hand or dual action machine. By hand it should be applied using a clean foam applicator pad. Apply 2-3 pea-sized drops to the applicator pad and massage evenly into the panel in a thin layer, allow to cure and haze for approximately 3-5 minutes. Remove the excess product by gently buffing with a clean microfibre buffing cloth. To achieve the best results we recommend application with a dual action polisher, using a foam finishing pad. Apply 2-3 pea-sized drops onto the finishing pad. Then work in thoroughly to the panel at a slow speed until only a thin film remains. The film should then be buffed off carefully using a clean microfibre buffing cloth.

The post Cover Up Filler Glaze appeared first on 50cal Detailing.

This specialist formulation not only achieves a mirror finish, but makes it last for an extended period of time. Our initial offering is presented with a subtle tutti frutti fragrance and just the hint of a yellow colour.

• Brilliant Finish
• Long lasting finish
• Ease of application and removal
• Residue free results
• Can be used on Chrome and alloy wheels to give the same brilliant protection
• Non-staining to plastics, but please do remove quickly if accidently applied.
• Subtle smell

Usage Guidelines

Ensure paintwork is dry and thoroughly cleaned prior to application. Fortress can be used by hand application or by machine.

To apply by hand simply use a soft foam pad and work into the paint surface in small circular motions and apply thinly.  After a period of 5-10 minutes simply buff the excess product off with a soft microfibre buffing cloth.

To apply by dual action polisher or rotary polisher, apply to a soft finishing pad and use on the machine polisher at a slow speed to apply a thin layer of fortress to the painted surface, allow to haze and buff with a soft microfibre buffing cloth to remove the excess products. Never apply and allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

The post Fortress Liquid Polish appeared first on 50cal Detailing.