Retaliate alloy wheel cleaner is a heavy duty concentrated wheel cleaner. It is completely acid free and is safe for use on all alloy wheels. This is a professional product and is highly concentrated, so it’s not to be used neat.

Retaliate uses the latest technology to break down road grime, dirt and brake dust easily without the need to be acidic.  The products was designed to make cleaning your wheels as effortless as possible. We have dilution guidelines but ‘our’ definition of dirty may differ somewhat from yours, so please dilute to suit! Simply spray the diluted product onto the wheel, allow a dwell time of circa 30 seconds to one minute, then agitate with your preferred choice of brush, power wash off and admire the showroom finish result. All of the components are fully biodegradable.

• Fully concentrated
• Extremely economical dilution ratios
• Non Acid
• Safe across all alloy wheel finishes
• Provides a near showroom finish.
• Will not degrade tyre rubbers.

Usage Guidelines

Depending on the degree of contamination Retaliate can be used at varying dilutions. For heavily soiled wheels remove surface soiling with a high pressure lance and apply Retaliate in a liberal coating through at a dilution of 1:1 and allow to dwell for 3-5 minutes. If required, agitate with an appropriate brush or mitt. Remove with a high pressure lance before moving to the next detailing step. For lighter soiled wheels, apply at a dilution of circa 5:1, then remove as before. Never apply and allow to dwell on wheels in direct sunlight. Always check the suitability of the product for your wheels by doing a quick test.

Decon Fallout Remover is our 50cal detailing weapon against iron fallout and stubborn brake dust.  We have developed decon to attack iron and get to work as soon as it’s sprayed on.  We have taken the chemistry to the edge with this product combining the latest surfactant technology with our existing fallout removal chemistry, but giving a stable, neutral product that will challenge, compete and leave the competition in its wake.

Simply apply decon by spraying onto the painted surface, wait for the reaction then rinse. The product is completely safe on paint work as well as alloy wheels. We offer this product in a ready to use format for ease of use and application. Use on cool surfaces, not in direct sunlight, with a short dwell time 1-2 minutes, drench rinsing and make sure you do not leave to dry.

• Instant results
• Self-wetting technology
• PH neutral
• Ready to use
• Great Cherry scent
• Paint work safe

Usage Guidelines

Depending on the degree of contamination Decon can be used at varying dilutions. For suspected heavy soiling, the recommended dilution with clean water is 1:1, however neat application may be required for heavily contaminated wheels. For body work a dilution with clean water of 1:1 should suffice. Remove any remaining residue with clean water. Never apply and allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

Cammo tyre dressing has been developed to give a multi-function option to the professional detailer or valeter. Cammo is easy to apply and spreads effortlessly. A single application seals and waterproofs the tyre wall leaving a matt to satin finish depending on the tyre. If you want your tyres to look slick, and have the wet look, a second application brings out the gloss.

When cammo is applied correctly you will never have an issue with ‘sling’ or drips onto your wheels or body panels. It lasts as well! A double application can still hold its appearance for up to 2-3 weeks, albeit depending on ambient conditions. The silicones will nourish the rubber and as the carrier flashes off so quickly, it won’t degrade the rubber unlike many products currently in the marketplace.

• Very economical due to its fast flash
• Kind to tyres
• Lasts for weeks
• Water repellent
• Zero sling
• Both Matt and Wet Look finishes achievable with a single product

Usage Guidelines

Apply neat to the tyre by using a sponge or microfibre applicator pad. Allow to dry and reapply if a deeper gloss is required. Always check the suitability of the product for your vehicle first, by doing a quick test.

The 50cal Detailing Tyre Dressing Applicator Pad makes applying cammo to your tyres an easy process.

This sponge applicator is the perfect accessory for applying tyre and trim gels and liquids. The firm green part makes the applicator easy to hold and the soft grey part easily forms around any surface and spreads the dressing eveningly to the tyres walls round mouldings and letterings. The sharp edges make it easy to apply the dressing accurately in tight areas.

Size: 95mm x 35mm

HOW TO USE THE TYRE DRESSING APPLICATOR:

1. Ensure that the surface is well cleaned and free from existing dressings.

2. Apply Cammo to the applicator and spread across the surface.

3. If needed apply another layer to enhance the appearance.

Kit Contains:

Retaliate Concentrated Wheel Cleaner 500ml

Decon Fallout Remover 500ml

Cammo Tyre Dressing 500ml

Tyre Dressing Applicator Sponge

The post 50cal Detailing Wheel Care Kit appeared first on 50cal Detailing.

The kit contains:

• Frontline Pre Wash
• Target Tar & Glue Remover
• Decon Fallout Remover
• Assault All Purpose Cleaner

Frontline Pre Wash Cleaner

When it come to a prewash this is the product you require. It has been formulated from the latest surfactant technology to be extremely aggressive on dirt but kind to paintwork. When it comes to trying to soften or remove heavy winter road grime, frontline is extremely effective.

Depending on the degree of soiling, Frontline can be diluted up to 100:1. Simply apply to the dirty paint work with a spray bottle or foam lance. Allow to dwell for 2-5 minutes then power wash off. This will leave the paintwork ready for the next detailing stage.

Target Tar & Glue Remover

Target is the ultimate in tar and glue removal. We have formulated Target tar and glue remover in such a way that it rapidly accelerates the penetration time into tar and glue deposits. You will see the tar literally dissolve in the solution and turn it brown. This will not affect top coats, paints or polishes when used as directed.

Target is an easy to use and fast acting tar remover.  50cal Target should ideally be sprayed thinly or applied to a microfiber cloth and held onto the affected area for 10-20 seconds. Then the tar should simply wipe away easily. After which, if there are any deposits left, repeat the process. Wipe the treated surface with a clean microfiber cloth and to complete the finish, and you can also use 50cal Detailing Stealth Last Touch Detailer as an aid to complete surface finishing.

Decon Fallout Remover

Decon Fallout Remover is our 50cal detailing weapon against iron fallout and stubborn brake dust.  We have developed decon to attack iron and get to work as soon as it’s sprayed on.  We have taken the chemistry to the edge with this product combining the latest surfactant technology with our existing fallout removal chemistry, but giving a stable, neutral product that will challenge, compete and leave the competition in its wake.

Simply apply decon by spraying onto the painted surface, wait for the reaction then rinse. The product is completely safe on paint work as well as alloy wheels. We offer this product in a ready to use format for ease of use and application. Use on cool surfaces, not in direct sunlight, with a short dwell time 1-2 minutes, drench rinsing and make sure you do not leave to dry.

Assault All Purpose Cleaner

Assault all purpose cleaner (APC) contains cutting edge surfactant technology and this means not only will it easily cut through the toughest grease and oil deposits, exhaust coke and brake dust but when diluted correctly, will be gentle enough to be used on interior fabrics and trim, without harming them.

Assault can be used for a huge variety of detailing and valeting tasks.

The post Deep Clean Decon Bundle Kit appeared first on 50cal Detailing.

Decon V2 is 50cal Detailing’s new improved iron fallout remover. It quickly and easily breaks apart sintered iron particles that have became embedded in your paint and wheels.

Decon V2 can be diluted 1:1 with water for a lighter application. Simply spray decon V2 onto the surface and allow to dwell for 2-3 minutes. As decon gets to work and reacts with the iron fallout it will ‘bleed’ purple. The surface may be agitated if necessary before being rinsed off to flush the fallout from the surface. The product is completely safe on paint work as well as alloy wheels. We offer this product in a ready to use format for ease of use and application.

Use on cool surfaces. Never allow to dwell on surfaces in direct sunlight and make sure you do not leave to dry. Always check the suitability of the product for your vehicle first by doing a quick test.

• Instant results
• Self-wetting technology
• PH neutral
• Ready to use
• Paint work safe

The post Decon V2 Iron Fallout Remover appeared first on 50cal Detailing.