50cal Detailing Citrus Blast is the ideal tool for areas of your vehicle which are susceptible to picking up all kinds of grime and dirt such as bumpers, sills, wheel arches, lower panels, and lots more.  It can even be used effectively as an engine bay cleaner.  Also, Citrus Blast can be used as a fantastic soft top cleaner and has anti-bacterial agents which will kill and prevents mould from growing back and leaving those unsightly blotches on your convertible roofs.

If you want to clean like the professionals then Citrus Blast should be in everyone’s detailing kit bag.

DILUTION RATES

Extremely heavy soiling/Degreasing – 1:5
Heavy road grime – 1:10
Normal pre-wash cleaning – 1:20
Light duty pre wash – 1:30
Very light duty cleaning (interiors etc) – 1:40 to 1:60

The post Citrus Blast Concentrated Citrus Pre-Wash appeared first on 50cal Detailing.

When it come to a prewash this is the product you require. It has been formulated from the latest surfactant technology to be extremely aggressive on dirt but kind to paintwork. When it comes to trying to soften or remove heavy winter road grime, frontline is extremely effective. We even went as far as to add a fantastic Cherry fragrance to help the first stage of your wash program at least smell a little better!

Depending on the degree of soiling, Frontline can be diluted up to 100:1. Simply apply to the dirty paint work with a spray bottle or foam lance. Allow to dwell for 2-5 minutes then power wash off. This will leave the paintwork ready for the next detailing stage.

• Low dilution activation rates
• High foaming
• Great Cherry smell
• Paint safe
• Economical to use
• Solvent free

Usage Guidelines

For best results use Frontline Pre-Wash through a high pressure foaming lance. Ideally one that has an independent product resevoir connected directly to the lance. Add approximately 10% to the resevior bottle and dilute with clean water. Adjust the lance settings to give the maximum foam density. Apply this to the vehice and wheels in a liberal coating and allow to dwell for 3-5 minutes. Remove with a high pressure lance before moving to the next detailing step. Never apply and allow to dwell on vehicle in direct sunlight.

Recommended Dilution Rates

– Heavy duty degreasing – 10:1 with clean fresh water

– Pre-Wash

Heavy Soiling               20:1 with clean fresh water

Light Soiling                 40:1 with clean fresh water

De-Dusting                   100:1 with clean fresh water

Kit Contains:

Frontline Pre wash Cleanser – 5L

Chemical Resistant Spray Bottle with Chemical Resistant Spray Head

The post Frontline Pre-wash Cleanser 5L with Spray Bottle appeared first on 50cal Detailing.

Combat is a PH neutral safe pre wash product.  So mild you could shower with it yourself, however when used correctly the hands on cleaning power of this product will leave your vehicle looking as good as when it left the showroom.  Developed with the latest technology, we have been able to achieve an extremely mild yet powerful product.  Not only does it smell fantastic but it also helps to soften dirt during your pre wash stages, making it easier for you to clean your car with having to apply any pressure to remove dirt and grime.

We recommend using Combat snow foam in a snow foam lance.  Simply add approximately 100ml of Combat into a 1L snow foam bottle and fill the rest with 900ml of fresh clean water.  This should result in a medium density foam and would be approximately a 100:1 dilution rate.  If you live in a hard water area or would like to have thicker foam, simply add some more combat to the mixture.

• Exceptional cleaning performance for a pH neutral product
• Totally wax safe (LSP safe)
• Very mild on dilution
• Wax and dewatering additives
• Extremely economical dilution rates
• Juicy Orange scent
• Developed in conjunction with the highest professional requirements
• High lubricity to aid with washing

Usage Guidelines

Depending on the degree of contamination Combat can be used at varying dilutions. For heavy soiling, the recommended dilution with clean water is 5:1 and for moderate soiling, 10:1. For general cleaning and light soiling a dilution of 20:1 should suffice. The easiest way to use Combat is through a snow foam lance but it can also be added to a pump sprayer or simply to a bucket like a shampoo and applied with a lambs wool mitt.  Remove / rinse any remaining residue with clean water. Never allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

Various fittings available to suit almost every pressure washer.

Pack Contains:

500ml of Combat Neutral Snow Foam

Lance Corporal Snowfoam Lance

Fitting to connect to your pressure washer as selected

The post Combat Neutral 500ml With Snow Foam Lance appeared first on 50cal Detailing.

Take care to check the existing fitting on your pressure washer and make sure you order the correct part. If you’re in any doubt please let us know and we will asist in making sure you get the correct part. A good example is the variations in the karcher HD triggers. Another issue you may find is that newer Bosch pressure washers don’t actually use a ‘Bosch’ fitting as most are black and decker compatible. Reduce Swirl Marks and Scratches – 95% of swirl marks and scratches are caused from improper washing equipment and techniques. Swirl marks, scratches, and holograms are all caused by rubbing dirt and grime into the paintwork causing damage which results in a dull and neglected finish.

The 50 Cal Detailing lance Corporal Premium Wide Neck Snow Foam Lance helps reduce swirl marks and scratches by allowing the user to pre-soak the vehicle’s exterior removing any loose contamination. Removing dirt and dust from those hard-to-reach areas is easier than ever. Often, the vehicle can be cleaned without any manual washing which makes the 50 Cal Detailing Premium Wide Neck Snow Foam Lance the perfect solution for a “Touch-Free” car wash.

Max Pressure: 180 bar
Max Temp: 60°C

Use this snow foam lance combined with Combat snow foam or Ambush Superfoam to produce a very thick layer of foam which clings to the surface of the vehicle encapsulating, softening and removing dirt making the wash process much safer and more efficient. The nozzle can be adjusted for the pattern of foam delivered and the valve on the top regulates the chemical dilution rate.

Various fittings available to suit almost every pressure washer.

Details:

• 1/4″ BSP Female thread.
• Please check your fitting before ordering.
• High quality coupling for heavy duty use.

Please Note: 
* The Karcher HD fitting does not fit with Karcher Easyforce Trigger units.
* The Bosch original fitting is not compatible with Bosch AQT (Aquatak) models.

The post Lance Corporal Snow Foam Lance appeared first on 50cal Detailing.

Ambush snow foam also has a built in wax and dewatering aid to further help the rinsing of the product from the vehicle. It works extremely efficiently on the removal of break dust and road film on wheels thus potentially rendering the need to use a secondary alloy wheel cleaner unnecessary. We recommend using a starting dilution of 1.5 to 2 inches into a 1lt wash bottle, topped up with ideally deionised water that’s attached to the foaming lance. The air intake and pressure should be set to the maximum settings available. The product is also enhanced with a rich Bubblegum smell.

• Unsurpassed cleaning performance
• Market beating foaming characteristics
• Unrivalled product dwell time on vehicle
• Excellent alloy wheel cleaning performance
• Wax and dewatering additives
• LSP (Last Step Product) safe
• Extremely economical dilution rates
• Rich Bubblegum smell
• Developed in conjunction with the highest professional requirements
• Not for amateurs!

Usage Guidelines

For best results use Ambush SuperFoam through a high pressure foaming lance. Ideally one that has an independent product reservoir connected directly to the lance. Add approximately 10-20% to the reservoir bottle and dilute with clean water. Adjust the lance settings to give the desired moose foam. Apply this to the vehicle and wheels in a liberal coating and allow to dwell for anything up to 30 minutes. Rinse off with a high pressure lance for a near ‘touchless’ finish. Never apply and allow to sit on vehicle in direct sunlight.

The post Ambush SuperFoam – Heavy Duty Snow Foam appeared first on 50cal Detailing.

We recommend using Combat snow foam in a snow foam lance.  Simply add approximately 100ml of Combat into a 1L snow foam bottle and fill the rest with 900ml of fresh clean water.  This should result in a medium density foam and would be approximately a 100:1 dilution rate.  If you live in a hard water area or would like to have thicker foam, simply add some more combat to the mixture.

• Exceptional cleaning performance for a pH neutral product
• Totally wax safe (LSP safe)
• Very mild on dilution
• Wax and dewatering additives
• Extremely economical dilution rates
• Juicy Orange scent
• Developed in conjunction with the highest professional requirements
• High lubricity to aid with washing

Usage Guidelines

Depending on the degree of contamination Combat can be used at varying dilutions. For heavy soiling, the recommended dilution with clean water is 5:1 and for moderate soiling, 10:1. For general cleaning and light soiling a dilution of 20:1 should suffice. The easiest way to use Combat is through a snow foam lance but it can also be added to a pump sprayer or simply to a bucket like a shampoo and applied with a lambs wool mitt.  Remove / rinse any remaining residue with clean water. Never allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

The post Combat Neutral Snow Foam appeared first on 50cal Detailing.

Depending on the degree of soiling, Frontline can be diluted up to 100:1. Simply apply to the dirty paint work with a spray bottle or foam lance. Allow to dwell for 2-5 minutes then power wash off. This will leave the paintwork ready for the next detailing stage.

• Low dilution activation rates
• High foaming
• Great Cherry smell
• Paint safe
• Economical to use
• Solvent free

Usage Guidelines

For best results use Frontline Pre-Wash through a high pressure foaming lance. Ideally one that has an independent product reservoir connected directly to the lance. Add approximately 10% to the reservoir bottle and dilute with clean water. Adjust the lance settings to give the maximum foam density. Apply this to the vehicle and wheels in a liberal coating and allow to dwell for 3-5 minutes. Remove with a high pressure lance before moving to the next detailing step. Never apply and allow to dwell on vehicle in direct sunlight.

Recommended Dilution Rates
– Heavy duty degreasing – 10:1 with clean fresh water

– Pre-Wash
Heavy Soiling               20:1 with clean fresh water
Light Soiling                 40:1 with clean fresh water
De-Dusting                   100:1 with clean fresh water

The post Frontline Pre-Wash Cleanser appeared first on 50cal Detailing.