The bottle is made from high density polyethylene. An excellent spray bottle for using with citrus pre cleaners and foaming wheel cleaners and all kinds of apcs.

The Big Blaster Foamer Spray head is the perfect companion when you need to use a pre wash foam or snow foam but don’t have a pressure washer or pressurised sprayer. It’s high output foaming head when combined with a foaming pre wash will produce a thick clinging foam.

The post 700ml Spray Bottle & Big Blaster Foaming Sprayer appeared first on 50cal Detailing.

The bottle is made from high density polyethylene. The spray head nozzle O-ring and piston cup are made of chemical resistant Viton. Holds up well against harsh chemicals and solvents.

The post 700ml Spray Bottle & Chemical Resistant Spray Head appeared first on 50cal Detailing.

Combat is a PH neutral safe pre wash product.  So mild you could shower with it yourself, however when used correctly the hands on cleaning power of this product will leave your vehicle looking as good as when it left the showroom.  Developed with the latest technology, we have been able to achieve an extremely mild yet powerful product.  Not only does it smell fantastic but it also helps to soften dirt during your pre wash stages, making it easier for you to clean your car with having to apply any pressure to remove dirt and grime.

We recommend using Combat snow foam in a snow foam lance.  Simply add approximately 100ml of Combat into a 1L snow foam bottle and fill the rest with 900ml of fresh clean water.  This should result in a medium density foam and would be approximately a 100:1 dilution rate.  If you live in a hard water area or would like to have thicker foam, simply add some more combat to the mixture.

• Exceptional cleaning performance for a pH neutral product
• Totally wax safe (LSP safe)
• Very mild on dilution
• Wax and dewatering additives
• Extremely economical dilution rates
• Juicy Orange scent
• Developed in conjunction with the highest professional requirements
• High lubricity to aid with washing

Usage Guidelines

Depending on the degree of contamination Combat can be used at varying dilutions. For heavy soiling, the recommended dilution with clean water is 5:1 and for moderate soiling, 10:1. For general cleaning and light soiling a dilution of 20:1 should suffice. The easiest way to use Combat is through a snow foam lance but it can also be added to a pump sprayer or simply to a bucket like a shampoo and applied with a lambs wool mitt.  Remove / rinse any remaining residue with clean water. Never allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.

Various fittings available to suit almost every pressure washer.

Pack Contains:

500ml of Combat Neutral Snow Foam

Lance Corporal Snowfoam Lance

Fitting to connect to your pressure washer as selected

The post Combat Neutral 500ml With Snow Foam Lance appeared first on 50cal Detailing.

This trigger allows you to simply spray directly from a 5L jar.  By holding the jar in one hand and spraying with the other, it allows a detailer or valeter to have increased versatility, control and also means that there’s no need to decant products which are ready to use into smaller bottles.

How to set up your extendable trigger
A drill bit or hole saw and a file is required to drill a hole in the lid of the 5L container.
We would advise drilling the hold in the lid while it is not screwed onto the container to avoid getting debris in the product.
After the hole has been drilled in the lid, file the edges smooth or enlarge the hold evenly to ensure a good fit.
feed the white hose into the 5L container.
The white cone fitting is then pressed into the lid to create a snug fit to hold the pipe in place going through the lid.
Then the user can begin spraying via the trigger on the end of the hose.

The post 5Ltr Extendible Trigger Sprayer – 1M appeared first on 50cal Detailing.